Description

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services.

Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

TAPE PIPE #2130 ISO 14726 &, BS1710 FLOW ARROWS 50MMX30M

REF NO : 332130
Category Pipe Identification Tape in accordance with BS 1710
Package Qty 1 RLS

Description

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services.

Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

More from 'Pipe Identification Tape in accordance with BS 1710'

Recently Viewed Products

ABOUT Con-Lash Supply Catalog

Our mission statement is to provide the absolute best customer experience available in the marine industry without exception.

Follow Us
POPULAR COLLECTIONS
OUR NEWSLETTER

Subscribe to get notified about product launches, special offers and news.

Powered By Logo Version - 24.07.25.1