Con-Lash Supply Catalog

Description

A sharp edged, carbon steel blade mounted on a multiply polished wood cutting board.

Accurate square cutting is ensured by a graduated ruler with right angles indicated on the board and a fitted guide plate to hold the paper firmly in place.

This device will easily cut paper, cardboard, leather, cloth, rubber, and many other materials.

IMPA 7

MOUNTED CUTTER 451MM

REF NO : 471033

Category Mounted Cutters

Package Qty 1 PCS

Description

A sharp edged, carbon steel blade mounted on a multiply polished wood cutting board.

Accurate square cutting is ensured by a graduated ruler with right angles indicated on the board and a fitted guide plate to hold the paper firmly in place.

This device will easily cut paper, cardboard, leather, cloth, rubber, and many other materials.

More from 'Mounted Cutters'

IMPA 7

MOUNTED CUTTER 319MM

REF NO : 471031

IMPA 7

MOUNTED CUTTER 388MM

REF NO : 471032

Recently Viewed Products

IMPA 7

STEEL PLATE UNGALV HOT-ROLLED, 8.0X914X1829MM

REF NO : 670711

IMPA 7

THERMOMETER DIAL BIMETAL, POCKET 0 TO 200C.DEG

REF NO : 651738

IMPA 7

FLANGE CARBON STEEL BLIND, DIN2527 PN40 15MM

REF NO : 735672

IMPA 7

GAS & LIQUID THERMOSENSOR, 1100DEG.C FOR TMDT2

REF NO : 651775

IMPA 7

WRENCH T-TYPE 6-POINT 50MM, FIXED HANDLE

REF NO : 610875

IMPA 7

THERMOMETER SIKA 175B 110X30MM, PT1/2 -30-50DEG.C 63MM-STEM

REF NO : 652133

IMPA 7

GAUGE PRESSURE W/GLYCERINE, REAR/DIRECT 0-25BAR 63MM G1/4"

REF NO : 653225

IMPA 7

HEX HEAD BOLT STAINLESS STEEL, M12 X 350MM

REF NO : 691840

IMPA 7

SCREWDRIVER PLASTIC HANDLE, NON-INSULATE PHILLIPS #3 150MM

REF NO : 612195

IMPA 7

REDUCER CONCENTRIC STEEL, BUTT-WELDING HP SCH40 90X80A

REF NO : 731568

IMPA 7

PAPER PHOTOGRAPHY PRINT GLOSS, QUARTO 254X305MM 20'S

REF NO : 472259

IMPA 7

HAMMER LEAD HANDLED, NO.1/2 (0.25KGS)

REF NO : 612681

IMPA 7

UNION COMPRESSION STEEL, 30MM 250KG

REF NO : 733181

IMPA 7

WASHER SUPERLOCK STEEL M19

REF NO : 695408

IMPA 7

LAMP COLORED B-22, 110-120V 20W YELLOW

REF NO : 790341

IMPA 7

CAP HEXAGON STAINLESS STEEL, 3/8 THREADED

REF NO : 732553

IMPA 7

CLEANER/DEGREASER BONDERITE, GRATO MARINE CLEANER 1LTR

REF NO : 551533

IMPA 7

LAMP REFLECTOR SPOT RS-H, OUTDOOR USE E-39 100V 1000W

REF NO : 790946

IMPA 7

CHECK VALVE ANSI300 CAST STEEL, FLANGED SWING TYPE #1811 12"

REF NO : 757347

IMPA 7

FLANGE CAST IRON RAISED FACE, DIN2533 16KG 175MM

REF NO : 734553

IMPA 7

NEEDLE SUPPORTER 3MM, FOR JET CHISEL JT-20

REF NO : 590475

IMPA 7

SCALER DECK HANDHELD AURAND, ELEC AC230V 12" WIDE M5-2E

REF NO : 592278

IMPA 7

PACKING PTFE RAMIE, PILLAR NO.426F 9.5MMX3.6MTR

REF NO : 810225

IMPA 7

FILE HALF-ROUND DOUBLE-CUT, SMOOTH 300MM

REF NO : 614345

IMPA 7

FILE FLAT DOUBLE-CUT, DEAD-SMOOTH 250MM

REF NO : 614323

IMPA 7

CHISEL FOR LONG REACH SCALER, BLADE WIDTH 25MM #705.1101

REF NO : 592521

IMPA 7

OVER FLOW VALVE DIN BRONZE, FLANGED END #523 DN 65

REF NO : 757037

IMPA 7

DRILL H.S.S. STRAIGHT SHANK, TWIST 6.7MM

REF NO : 630165

IMPA 7

SCALING EQUIPMENT ROD TYPE, PNEUMATIC 12100 26-45MM ID

REF NO : 592362

IMPA 7

SOAP TOILET LUX 90GRMX2/PKT

REF NO : 550248

IMPA 7

SOCKET WRENCH 12-POINT, 9.5MM/SQ DRIVEX17.5MM (11/16")

REF NO : 610230

IMPA 7

GLOBE VALVE ANSI150 CARBON STL, S.STEEL TRIM FLANGED #1820 6"

REF NO : 757144

IMPA 7

GASKET SPIRAL WOUND TYPE "OR", DIN PN16 300A W/MORE DETAILS

REF NO : 815916

IMPA 7

SCRAPER ANGLE NON-SPARK, SPECIAL ALUM BRONZE 40X250MM

REF NO : 615846

IMPA 7

TAP STRAIGHT FOR TAPER THREAD, PS1/4X19T CARBON STEEL

REF NO : 631567

IMPA 7

HOSE LAYFLAT RED SUPPLY HOSE, 38MMX15MTR FOR GAS FREEING FAN

REF NO : 591552

IMPA 7

DRILL CHUCK WITH KEY 14.0MM, DIAM 60MM J.T. HOLE #3

REF NO : 632339

IMPA 7

LIVE CENTER S-TYPE MT#6 340MM

REF NO : 632435

IMPA 7

DRILL SLEEVE MT#3X4

REF NO : 632355

IMPA 7

FLARING TOOL RIDGID #458

REF NO : 616773

IMPA 7

DRILL CHUCK ARBOR JT#1XMT#2

REF NO : 632377

IMPA 7

GREASE LUBRICATOR PORTABLE, AIR-OPERATED SKR-55

REF NO : 617501

IMPA 7

SEALING AGENT THREE BOND 1105, 150GRM

REF NO : 812629

IMPA 7

TOOL WITH CARBIDE TIP SINGLE, #32-4 LEFT HAND 25X25X160MM

REF NO : 632710

IMPA 7

GAS ARGON

REF NO : 850118

IMPA 7

CALIPER ONE SIDED 300MM

REF NO : 650206

IMPA 7

V BELT WEDGE TYPE 3VX 1000

REF NO : 814865

No result found

No result found

Description

MOUNTED CUTTER 451MM

Description

More from 'Mounted Cutters'

Recently Viewed Products