FLOOR SWEEPER MANUAL, FLAP BRUSH 1650H2/HOUR

Description

Motorless push sweeper for cleaning small stones, sands, wood chips up from ground or deck surface.

Available two patterns of sweeping brush: Flap brush for sweeping small stones, sands, wood chips, and so on.

Round brush for sweeping fine dust, particles.

Sweeping capacity is approx. 1,650 m2/hour.

IMPA 7

FLOOR SWEEPER MANUAL, FLAP BRUSH 1650H2/HOUR

REF NO : 510836

Category Manual Floor Sweepers

Package Qty 1 PCS

Description

Motorless push sweeper for cleaning small stones, sands, wood chips up from ground or deck surface.

Available two patterns of sweeping brush: Flap brush for sweeping small stones, sands, wood chips, and so on.

Round brush for sweeping fine dust, particles.

Sweeping capacity is approx. 1,650 m2/hour.

More from 'Manual Floor Sweepers'

IMPA 7

FLOOR SWEEPER MANUAL, ROUND BRUSH 1650H2/HOUR

REF NO : 510839

Recently Viewed Products

IMPA 7

LAMP PILOT TUBULAR CLEAR E-12, 12V 0.11A 15X45MM

REF NO : 790532

IMPA 7

PIPE CARBON STEEL OST-2, 18X2.0MM 4MTR

REF NO : 710722

IMPA 7

PIPE STEEL LOW-TEMPERATURE, STPL SCH-80 3-1/2"(90A)X5.5MTR

REF NO : 710637

IMPA 7

CHECK VALVE DIN C/IRON FLANGED, LIFT TYPE PN16 #101 DN 32

REF NO : 755874

IMPA 7

LAMP PILOT TUBULAR CLEAR E-12, 18V 3W 20X48MM

REF NO : 790629

IMPA 7

PIPE CARBONSTEEL HIGH-PRESSURE, STS SCH-80 6"(150A)X5.5MTR

REF NO : 710440

IMPA 7

LAMP TELEPHONE INDICATOR T6.8, 60V 40MA 6.8X44MM

REF NO : 790874

IMPA 7

VALVE BUTTERFLY CAST IRON DIN, LUG TYPE #52 PN10 250MM

REF NO : 754438

IMPA 7

FAUCET WALL RIGHT HAND W/HIGH, SWIVEL SPOUT & AERATOR 13(1/2)

REF NO : 530192

IMPA 7

IMPACT TOOL RL 7/15 / 5/8", FOR RUST REMOVER

REF NO : 592481

IMPA 7

PACKING GLAND NON-AS CARBON, FIBRE VALQUA 6201 4MMX3MTR

REF NO : 815402

IMPA 7

PUMP PISTON LUB AIR MOTOR 3"D, 5:1 NPT 275GALLON LM2305A-51

REF NO : 617437

IMPA 7

BUTTERFLY VALVE DIN CAST IRON, PN10 SHORT #4620 150MM

REF NO : 756306

IMPA 7

DRILL CENTER A-TYPE, 3.15MM DRILL DIAM 60DEG

REF NO : 630505

IMPA 7

SCALER NEEDLE TRELAWNY 2B, #139.2000 WITH DUST SHROUD

REF NO : 592503

IMPA 7

GATE VALVE ANSI 125 CAST IRON, BRONZE TRIM FLANGED #1800 6"

REF NO : 757245

IMPA 7

CLEANER & DEGREASER LOCTITE, PARTS WASHER CLEANER 7012 5LTR

REF NO : 551513

IMPA 7

BALL VALVE DIN S.STEEL FLANGED, FULL BORE PN 40 #7389 DN 125

REF NO : 756840

IMPA 7

VALVE PRESS. REDUCE W/TREAD, GUNMETAL #684KGSSK DN8

REF NO : 757470

IMPA 7

BALL VALVE DIN FORGED BRASS, FULL BORE SCREWED #1607 2-1/2"

REF NO : 756609

IMPA 7

RECEPTACLE 3WAYS EUROPEAN PLUG, 2 ROUND PINS W/3MTR CORD

REF NO : 792965

IMPA 7

SODIUM BORATE (BORAX) 500GRM

REF NO : 550958

IMPA 7

BALL BEARING SINGLE ROW, DEEP GROOVE NO.6215Z

REF NO : 770246

IMPA 7

ADAPTOR 3-ROUND PIN (B3) PLUG &, (A/B/C/O/SE/BF/O2) RECEPTACLE

REF NO : 792958

IMPA 7

DRILL H.S.S. MORSE TAPER SHANK, TWIST 61MM

REF NO : 630374

IMPA 7

SWITCH PUSH BUTTON FOR HOIST, INDIRECT CONTROL 2-BUTTONS

REF NO : 793087

IMPA 7

ROLLER BEARING NU-311

REF NO : 771608

IMPA 7

SCREWDRIVER NON-SPARK PHILLIPS, NO.1X75MM SPECIAL ALUM BRONZE

REF NO : 615920

IMPA 7

DRILL CHUCK ARBOR JT#3XMT#4

REF NO : 632386

IMPA 7

PASTE SEAL VALQUA, LIGHT BROWN 800GRM

REF NO : 812695

IMPA 7

EXTRACTOR SCREW SET 3'S, FOR DRILL SIZE 6.4-10.3MM

REF NO : 632488

IMPA 7

DRILL SLEEVE MT#5X6

REF NO : 632360

IMPA 7

BALL BEARING SINGLE THRUST, WITH FLAT SEAT NO.51113

REF NO : 773514

IMPA 7

DRILL SOCKET FOR MORSE TAPER, MT#2X4

REF NO : 632367

IMPA 7

TUBE BENDER LEVER TYPE RIDGID, #408 1/2"

REF NO : 616785

IMPA 7

ROTARY BUR CARBIDE TYPE-F, 3MM SHANK/3MM BLADE

REF NO : 632551

IMPA 7

TOOL BIT RECTANGULAR FLAT HSS, 10X16X160MM

REF NO : 632621

IMPA 7

TOOL WITH CARBIDE TIP SINGLE, #35-3 STRAIGHT 19X19X140MM

REF NO : 632730

IMPA 7

CARBIDE TIP #01-3 19X13X5MMXR5

REF NO : 632904

IMPA 7

PORTHOLE GLASS FROST, 262MM DIAMX8MM THICK

REF NO : 814734

IMPA 7

PIPE COVER HEAT INSULATING 40A, CALCIUM SILICATE 30(T)X610MM

REF NO : 813955

IMPA 7

PIPE COVER HEAT INSULATING 65A, CALCIUM SILICATE 40(T)X610MM

REF NO : 813957

IMPA 7

GAUGE FEELER BEARING 090 042, RANGE 0.40-0.70MM

REF NO : 650590

IMPA 7

CHARGING HOSE REFRIGERANT GAS, R-22 RED 3/8" 92CM

REF NO : 850323

IMPA 7

SPRING PLATFORM SCALE, WITH WHEEL CAPACITY 50KGS

REF NO : 650766

IMPA 7

SPANGAS REFILLABLE PROPANE, 0.7%(35%LEL) BALANCE AIR 3.4L

REF NO : 851773

IMPA 7

SPARE PLATE FOR ARC WELDING, 105X50X2MM CLEAR

REF NO : 851146

No result found

No result found

Description

FLOOR SWEEPER MANUAL, FLAP BRUSH 1650H2/HOUR

Description

More from 'Manual Floor Sweepers'

Recently Viewed Products