Con-Lash Supply Catalog

Description

Powerful hammers for billet chipping, general chipping and the removal of calking/weld flux, paint and rust in limited space.

There are two kinds of shank types, round or hexagon, are available.

When ordering, please specify which shank model is required.

Required air pressure is 0.59 MPa (6 kgf/cm2).

The specifications listed here are for your reference.

If you wish to order chipping hammers from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 598.

IMPA 7

CHIPPING HAMMER PNEUMATIC, ROUND SHANK

REF NO : 590361

Category Chipping Hammers Pneumatic

Package Qty 1 SET

Description

Powerful hammers for billet chipping, general chipping and the removal of calking/weld flux, paint and rust in limited space.

There are two kinds of shank types, round or hexagon, are available.

When ordering, please specify which shank model is required.

Required air pressure is 0.59 MPa (6 kgf/cm2).

The specifications listed here are for your reference.

If you wish to order chipping hammers from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 598.

More from 'Chipping Hammers Pneumatic'

IMPA 7

CHIPPING HAMMER PNEUMATIC, HEX SHANK

REF NO : 590362

Recently Viewed Products

IMPA 7

SPARE PAINT ROLLER NYLON, 25MM WIDTH

REF NO : 510346

IMPA 7

SOCKET FOR IMPACT WRENCH, 19MM/SQ DR. X 36MM

REF NO : 590241

IMPA 7

FIRE PROOF JACKET FOR STRAUB, GRIP COUPLING FIRE-FENCE 150A

REF NO : 614280

IMPA 7

SPARE PAINT ROLLER NYLON, 280MM WIDTH

REF NO : 510356

IMPA 7

FAUCET WALL SWIVEL SPOUT, S UNDER 1/2"-200MM SA83360

REF NO : 531118

IMPA 7

DRILL PNEUMATIC 16MM, URYU UD-80-04

REF NO : 590348

IMPA 7

FL LIGHT BULB COMPACT PEAR, E-26 110V 40W COOL WHITE

REF NO : 791562

IMPA 7

SOLDERING IRON ELEMENT I-FLAT, 110V 150W

REF NO : 795111

IMPA 7

LAMP FLUORESCENT LED COOLWHITE, INCANDESCENT 8W 28X588.7MM

REF NO : 791481

IMPA 7

CARBORUNDUM PASTE GRIT#1500, MICRO FINE 450GRM

REF NO : 614203

IMPA 7

WRENCH PIPE STRAIGHT RIDGID, 250MM

REF NO : 616532

IMPA 7

VALVE BUTTERFLY CAST IRON DIN, MONO FLANGED #56 PN16 80MM

REF NO : 754553

IMPA 7

VARNISH INSULATION RED 4LTR

REF NO : 795524

IMPA 7

CHISEL TRIANGLE CROSS CUT, #850-27B FOR CHISEL & CHIPPER

REF NO : 592428

IMPA 7

DIAPHRAM VALVE DIN C/IRON PN10, FULL BORE NO LINING #5651 40MM

REF NO : 756519

IMPA 7

FLANGE CARBON STEEL SLIP ON, RAISED FACE DIN86030 PN16 50MM

REF NO : 735777

IMPA 7

PLUG CEE MALE AC380V RED 4P, 125AMP 6H IP67

REF NO : 792713

IMPA 7

WRENCH STRIKING RING 12P 55MM, STAINLESS STEEL

REF NO : 616095

IMPA 7

TAP HAND METRIC FINE M12, P1MM 3'S HIGH SPEED STEEL

REF NO : 631229

IMPA 7

VALVE OVERFLOW RED BRASS DIN, #618T 3/4" W/TEFLON GASKET

REF NO : 756963

IMPA 7

TAP TAPER FOR TAPER THREAD, PT1/4X19T CARBON STEEL

REF NO : 631517

IMPA 7

GASKET FLANGE EPDM NONASBESTOS, RAISED FACE 5KG/CM2 3MM 150A

REF NO : 811981

IMPA 7

CABLE CUTTER BAHCO #2520 550MM

REF NO : 616261

IMPA 7

PUMP PORTABLE BATTERY POWERED, WARREN RUPP SPA1-1/2-E BSPT

REF NO : 591644

IMPA 7

CORDOBOND GLASS TAPE, 76MMX150MTR

REF NO : 812324

IMPA 7

DIE ROUND ADJ WHITWORTH COARSE, W9/16X12TXOD38MM CARBON STEEL

REF NO : 631942

IMPA 7

TUBE BENDER LEVER TYPE RIDGID, #410M 10MM

REF NO : 616788

IMPA 7

GLUE GENERAL PURPOSE 3KG

REF NO : 812705

IMPA 7

ROLLER BEARING NEEDLE, NO. RNA-4916

REF NO : 773020

IMPA 7

TOOL BIT TIP WELDED HSS, PARTING-20 20X20X220MM

REF NO : 633125

IMPA 7

KNURL PITCH 14 STRAIGHT LINE, OD16MM

REF NO : 633251

IMPA 7

PIPE HEAT INSULATION ROCK WOOL, THICK40MM 100A X 1000MM

REF NO : 813846

No result found

No result found

Description

CHIPPING HAMMER PNEUMATIC, ROUND SHANK

Description

More from 'Chipping Hammers Pneumatic'

Recently Viewed Products