Con-Lash Supply Catalog

Description

Suitable for the removal of old paint and rust.

The specifications listed here are for your reference.

If you wish to order scaling hammers from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 598. Recommended air pressure is 0.59 MPa (6 kgf/cm2).

The air hose nipple is furnished as a standard accessory.

Due to slight differences in available models, please specify the manufacturer’s name and model number when ordering spare hammers.

IMPA 7

SCALING HAMMER PNEUMATIC, SINGLE

REF NO : 590382

Category Scaling Hammers Pneumatic

Package Qty 1 SET

Description

Suitable for the removal of old paint and rust.

The specifications listed here are for your reference.

The air hose nipple is furnished as a standard accessory.

Due to slight differences in available models, please specify the manufacturer’s name and model number when ordering spare hammers.

More from 'Scaling Hammers Pneumatic'

IMPA 7

SCALING HAMMER PNEUMATIC, TRIPLE

REF NO : 590383

Recently Viewed Products

IMPA 7

LAMP PILOT TUBULAR CLEAR E-26, 24V 5W 26X70MM

REF NO : 790584

IMPA 7

CURVED CURTAIN RAIL, STAINLESS STEEL

REF NO : 491508

IMPA 7

AUGER BIT RAFTING TYPE 6.5MM

REF NO : 613536

IMPA 7

LAMP PILOT GLOBULAR CLEAR E-10, 30V 1W 11X23.5MM

REF NO : 790656

IMPA 7

LAMP PILOT GLOBULAR CLEAR E-12, 115V 5W 25X40MM

REF NO : 790789

IMPA 7

HOSE BAND DOUBLE BOLT TYPE, MALLEABLE IRON 170-180MM

REF NO : 613848

IMPA 7

PIPE CARBONSTEEL HIGH-PRESSURE, STS SCH-40 18"(450A)X5.5MTR

REF NO : 710421

IMPA 7

PIPE STAINLESS STEEL SUS-304, SCH-5 8A 1/4"X4MTR

REF NO : 711002

IMPA 7

CHECK VALVE DIN BRONZE SCREWED, LIFT TYPE #500BR 3/4"

REF NO : 755754

IMPA 7

PAINT ROLLER WOOL 300MM WIDTH, COMPLETE WITH HANDLE

REF NO : 510312

IMPA 7

BRUSH STENCIL 32MM DIAM

REF NO : 510213

IMPA 7

GATE VALVE DIN CAST STEEL PN16, FLANGED #3816 DN 100

REF NO : 755703

IMPA 7

BRUSH SWEEP W/HAIR MIX, PLASTIC VIKAN#3150 280MM WIDTH

REF NO : 510888

IMPA 7

LAMP REFLECTOR SPOT RS-H, OUTDOOR-USE E-26 100-110V 150W

REF NO : 790942

IMPA 7

LAMP PILOT GLOBULAR CLEAR, BA-15D 110V 5W 19X35MM

REF NO : 790687

IMPA 7

VALVE SAFETY DIAPHRAGM 651MHIK, RED BRASS 1" 2.5/3/3.5BAR

REF NO : 757083

IMPA 7

SOLDERING IRON ELEMENT J-ROUND, 220V 100W

REF NO : 795146

IMPA 7

TEE FLARED FEMALE END BRASS, 1/4"XPT1/8

REF NO : 733811

IMPA 7

BRUSH CABIN UNIVERSAL, 450MM WIDTH WITH LONG HANDLE

REF NO : 510638

IMPA 7

VALVE CHECK CARBON STEEL DIN, WAFER LONG PN16 #4012 350MM

REF NO : 755970

IMPA 7

LAMP FLUORESCENT DAYLIGHT, FL-20SD 20W 32.5X580MM

REF NO : 791427

IMPA 7

PIPECOUPLING TEEKAY AXILOCK-FP, FIRE PROTECTED PIPE OD 38MM

REF NO : 614236

IMPA 7

GRINDER STRAIGHT PNEUMATIC, WHEEL SIZE 125X19X12.7MM

REF NO : 590332

IMPA 7

PIPECOUPLING TEEKAY AXILOCK-FP, FIRE PROTECTED PIPE OD 165MM

REF NO : 614266

IMPA 7

SEALING CAP FOR FIRE/DECKWASH, VALVE NAKAJIMA 40A

REF NO : 756067

IMPA 7

FLANGE CAST IRON RAISED FACE, DIN2532 10KG 100MM

REF NO : 734530

IMPA 7

PACKING ARAMID FIBRE NO.4526L, ASBESTOS FREE 19MMX3MTR

REF NO : 810457

IMPA 7

CLAMP TUBE POLYPROPYLENE, W/WELD PLATE HEAVY 100MM

REF NO : 613974

IMPA 7

RUST REMOVAL MACHINE AC110V 1P, 300MM WIDTH ICO 11500-0-300M

REF NO : 591967

IMPA 7

FL-LAMP HOLDER SUPPORT-TYPE, PHENOL RESIN 250V 1A 39MM-WIDE

REF NO : 791526

IMPA 7

VALVE BUTTERFLY CAST IRON DIN, LUG TYPE SERIES 52 PN10 50MM

REF NO : 754431

IMPA 7

PLUG VALVE DIN CAST IRON, FLANGED PN10 2-WAY #52BKP DN65

REF NO : 756177

IMPA 7

UNION TEE FLARELESS BRASS, 20MMXPF3/4

REF NO : 734067

IMPA 7

CONNECTOR MALE FLARELESS BRASS, 25MMXPT3/4

REF NO : 734014

IMPA 7

CLAMP TUBE POLYPROPYLENE, W/WELD PLATE HEAVY 70MM

REF NO : 613968

IMPA 7

WATER CLOSET BO COMBINATION, WATERLINE SA076009

REF NO : 531504

IMPA 7

SPARE THROTTLE ANVIL FOR, JET CHISEL JT-20

REF NO : 590532

IMPA 7

PIPE STAINLESS STEEL SUS-304, SCH-160 200A 8"X4MTR

REF NO : 711163

IMPA 7

YCC-PARTS CLEANER 18LTR

REF NO : 553326

IMPA 7

RUST REMOVAL MACHINE PNEUMATIC, 300MM ICO #11400-0-300

REF NO : 591962

IMPA 7

FL CEILING LIGHT W.T. W/GLOBE&, GUARD AC100/115V KAW401 40WX1

REF NO : 791873

IMPA 7

CARBORUNDUM PASTE GRIT#50, VERY COARSE 450GRM

REF NO : 614216

IMPA 7

VALVE SAFETY CAST IRON 352TGFL, GASTIGHT W/LEVER HDL PN40 DN50

REF NO : 756274

IMPA 7

PACKING NON ASBESTOS CHEMICAL, PUMP PILLAR NO.4527L 8MMX3MTR

REF NO : 810523

IMPA 7

SOLDERING IRON ELEMENT I-ROUND, 110V 30W

REF NO : 795102

IMPA 7

VALVE BUTTERFLY CAST IRON DIN, FLANGED TYPE #55 PN6 500MM

REF NO : 754473

IMPA 7

DISC PAPER ABRASIVE 180MM, GRIT #120

REF NO : 614666

IMPA 7

SAFETY GUARD #2000-11, FOR ICO CHIPPING HAMMER

REF NO : 591954

IMPA 7

BRUSH WIRE CUP STEEL TWISTED, KNOT PT/NO.340.167

REF NO : 591295

IMPA 7

FL LIGHTBULB COMPACT GLOBELESS, E-26 110V 100W DAYLIGHT

REF NO : 791595

IMPA 7

SPARE CHISEL BLANK 16MM #2003, FOR LONG HANDLE SCRAPER

REF NO : 590449

IMPA 7

FLOODLIGHT FIXTURE FOR SODIUM, LAMP 220V 400WX1

REF NO : 791822

IMPA 7

UNIVERSAL JOINT MARINE, TYPE-BB1 40 STEEL

REF NO : 617258

IMPA 7

SCREWS TO FLOOR 63MM 2'S, T53DN

REF NO : 530313

IMPA 7

POLISH PLAIN WOOD LIQUID 4LTR

REF NO : 550378

IMPA 7

GATE VALVE ANSI 300 CARBON STL, S.STEEL TRIM FLANGED #1870 4"

REF NO : 757273

IMPA 7

Y-STRAINER DIN BRONZE THREADED, #1013 1/2"

REF NO : 756803

IMPA 7

TORCH SAFETY PERSONAL ISSUE, WOLF M-40 ATEX LED MINI

REF NO : 792278

IMPA 7

DRILL CENTER B-TYPE, 12.5MM DRILL DIAM 75DEG

REF NO : 630549

IMPA 7

DISC PAPER ABRASIVE 125MM, GRIT #100

REF NO : 614635

IMPA 7

GREASE NIPPLE PIN TYPE, PF 1/8 PLATED STEEL

REF NO : 617621

IMPA 7

WHEEL CUT-OFF RESINOID GRAIN36, 205X2.0X22.23MM 4300MTR/MIN

REF NO : 614867

IMPA 7

TUBE PVC ELECTRIC ID-15MM

REF NO : 795488

IMPA 7

TUBE EMPIRE ELECTRIC ID-3MM

REF NO : 795472

IMPA 7

DRILL H.S.S. STRAIGHT SHANK, TWIST 1.9MM

REF NO : 630117

IMPA 7

PACKING GLAND NON-AS CARBON, FIBRE VALQUA 6201 5MMX3MTR

REF NO : 815403

IMPA 7

BALL BEARING SINGLE ROW, DEEP GROOVE NO.6318

REF NO : 770339

IMPA 7

TABLE LIGHT UNIVERSAL 20W, FL-LAMP WITH TABLE BASE

REF NO : 792129

IMPA 7

BALL BEARING SINGLE ROW, DEEP GROOVE NO.6302Z C3

REF NO : 770733

IMPA 7

WASHER PRESSURE GRACO 23:1, HYDRA-CLEAN CART MOUNT 247551

REF NO : 590738

IMPA 7

TAP HAND METRIC COARSE, M27XP3.00MM 3'S CARBON STEEL

REF NO : 631031

IMPA 7

REAMER HAND 1/50 TAPER PIN, HELICAL FLUTE 8.0MM

REF NO : 630842

IMPA 7

WRENCH SINGLE OPEN END 12MM, NON-SPARK BERYLLIUM COPPER

REF NO : 615422

IMPA 7

TAP HAND METRIC FINE, M11X1MM 3'S CARBON STEEL

REF NO : 631125

IMPA 7

WRENCH DOUBLE OPEN END 30X32MM, STAINLESS STEEL

REF NO : 616047

IMPA 7

GASKET SPIRAL WOUND TYPE "OR", JIS16/20K 65A W/MORE DETAILS

REF NO : 815863

IMPA 7

SULPHURIC ACID 20KGS

REF NO : 550976

IMPA 7

Y-STRAINER DIN CAST IRON, FLANGED PN16 #1019 DN 80

REF NO : 756832

IMPA 7

GASKET SPIRAL WOUND TYPE "IOR", DIN PN16 150A W/MORE DETAILS

REF NO : 815782

IMPA 7

RECEPTACLE W/SWITCH WATERTIGHT, 3PIN USCG TYPE R&S CAST-IRON

REF NO : 792857

IMPA 7

BALL BEARING SINGLE ROW, DEEP GROOVE NO.6019 C3

REF NO : 770520

IMPA 7

BALL BEARING SINGLE ROW, DEEP GROOVE NO.627

REF NO : 770464

IMPA 7

DRILL STAND 6.6-13.0MM, 65HOLES

REF NO : 630273

IMPA 7

BALL BEARING SINGLE ROW, DEEP GROOVE NO.6011 C3

REF NO : 770512

IMPA 7

WRENCH DOUBLE OPEN END 36X38MM, STAINLESS STEEL

REF NO : 616051

IMPA 7

DRILL H.S.S. MORSE TAPER SHANK, TWIST 38MM

REF NO : 630351

IMPA 7

SPARE BLADE #4 PLASTIC, FOR ELEC. JIGSAW 5PCS/PKT

REF NO : 591176

IMPA 7

DRILL H.S.S. MORSE TAPER SHANK, TWIST 20.5MM

REF NO : 630322

IMPA 7

SOCKET WRENCH 12POINT S.STEEL, 19MM/SQ DRIVEX50MM

REF NO : 616880

IMPA 7

WATER BLASTER ULTRA HIGH, PRESSURE DIESEL C-800/20D

REF NO : 590876

IMPA 7

TAP HAND WHITWORTH COARSE, 3/32"X48T 3'S CARBON STEEL

REF NO : 631302

IMPA 7

GASKET SPIRAL WOUND "OR" ASME, 300 SIZE 10B W/MORE DETAILS

REF NO : 815954

IMPA 7

SWITCH PUSH BUTTON MARINE, SURFACE #2S WATERTIGHT

REF NO : 793069

IMPA 7

GASKET SPIRAL WOUND "OR" ASME, 150 SIZE 3/4B W/MORE DETAILS

REF NO : 815922

IMPA 7

SCREWDRIVER NON-SPARK 6X125MM, SPECIAL ALUMINIUM BRONZE

REF NO : 615904

IMPA 7

SOCKET WRENCH 12POINT S.STEEL, 9.5MM/SQ DRIVEX9MM (11/32")

REF NO : 616836

IMPA 7

GASKET SPIRAL WOUND "OR" ASME, 150 SIZE 8B W/MORE DETAILS

REF NO : 815933

IMPA 7

ALARM BELL EXPLOSION-PROOF, BX-10C AC100V 22VA 85DB

REF NO : 793454

IMPA 7

WRENCH ADJUSTABLE NON-SPARK, BERYLLIUM COPPER ALLOY 250MM

REF NO : 615624

No result found

No result found

Description

SCALING HAMMER PNEUMATIC, SINGLE

Description

More from 'Scaling Hammers Pneumatic'

Recently Viewed Products