Coupling joints, because of their greater flexibility and economy, are steadily replacing flanged pipe joints in today’s plant and marine applications.

Unlike flanged joints, couplings not only eliminate the need for costly welding but also compensate for extreme degrees of pipe linear expansion, vibration, and laying deflection.

From chemical plants to mammoth tankers, these couplings are utilized extensively throughout plant and marine piping.

As a wide range of models is available, the most common models have been selected and described below.

1. Construction: As illustrated above, the most common models consist of a middle ring (1) two followers

(2) two wedge gaskets

(3) four bolts & nuts

(4) and two stop bolts

(5) Both the middle ring and the followers are made of hot rolled steel, and the wedge gaskets are made of natural or synthetic rubber.

When the bolts are tightened, the followers press the gaskets against the spherical surface of the pipes and the tapered surface of the middle rings providing a leaktight connection.

When the expansion force of the pipes exceeds the wedging force, the pipes slide and deflect within the gaps between the outer surface of the pipes and the inner surface of the middle ring and followers.

2. Features: The structural design of these flexible pipe couplings offers easy and economical pipe jointing.

Pipes can be jointed easily with the use of a spanner.

Centering of the pipes and finishgrinding of the pipe sections is not required.

Compared with flanged pipe joints, these pipe couplings assure economical pipe jointing without the need for costly welding or any other additional procedures.

Usually absorbs 65 – 135 mm of pipe linear expansion (specially available models absorb more than 200 mm of linear expansion) and a considerable degree of pipe vibration as well.

Also, they allow for joint deflection up to 6 degrees and can join pipes of different material and/or diameter. 3. How to order: When ordering, please specify the following points.

1. Kind of pipes to be connected (steel, cast iron, vinyl, etc)

2. Pipe outside diameter.....mm

3. Working pressure.....kgf/cm2

4. Kind of liquid or gas of the line content

(desired gasket material)

5. Rust preventive treatments (paint)

Flexible Pipe Couplings for Plain End Pipes: 1. Hot Rolled Steel Middle Ring & Follower: These products are all formed from special section steel.

As it is designed and built to withstand severe operating conditions on board, no special care is necessary for any applications. Couplings of sizes other than those listed above are also available upon request.

Seawater resistant couplings made of a special alloy steel are also available upon request.

The seawater couplings have the same dimensions and shape as those listed above.

When ordering, please specify the nominal size.