LADDR PILOT MED/USCG APPROVED, NORMALISATION STEP 6MTR

Description

Steps have nonskidding surface and are secured with aluminium clamps. Ropes not painted or coated or covered and thimbles will be provided. Rope will be spliced to top on the ladder. Two patterns of step thickness are available as indicated in the table below, but thinner size step is most common.

IMPA 8

LADDR PILOT MED/USCG APPROVED, NORMALISATION STEP 6MTR

REF NO : 232033

Category Pilot Ladders as per Latest MED/USCG Approved

Package Qty 1 SET

Description

More from ' Pilot Ladders as per Latest MED/USCG Approved '

IMPA 8

LADDR PILOT MED/USCG APPROVED, REGULAR STEP 3MTR

REF NO : 232029

IMPA 8

LADDR PILOT MED/USCG APPROVED, REGULAR STEP 6MTR

REF NO : 232031

IMPA 8

LADDR PILOT MED/USCG APPROVED, REGULAR STEP 9MTR

REF NO : 232032

IMPA 8

LADDR PILOT MED/USCG APPROVED, NORMALISATION STEP 3MTR

REF NO : 232030

IMPA 8

LADDR PILOT MED/USCG APPROVED, NORMALISATION STEP 9MTR

REF NO : 232034

IMPA 8

STEP WOOD REGUAR FOR MED/USCG, PILOT LADDER 525X115X63MM

REF NO : 232035

IMPA 8

SPREADER WOOD REGULAR MED/USCG, PILOT LADDER 1800X115X63MM

REF NO : 232036

IMPA 8

STEP RUBBER FOR MED/USCG, PILOT LADDER 530X120X80MM

REF NO : 232037

IMPA 8

STEP WOOD REPAIR FOR MED/USCG, PILOT LADDER 525X115X63MM

REF NO : 232038

IMPA 8

SPREADER WOOD REPAIR MED/USCG, PILOT LADDER 1800X115X63MM

REF NO : 232039

IMPA 8

STEP WOOD REGUAR FOR MED/USCG, NORMALISATION 525X115X63MM

REF NO : 232046

IMPA 8

SPREADER WOOD REGULAR MED/USCG, MORMALISATION 1800X115X63MM

REF NO : 232047

IMPA 8

STEP RUBBER FOR MED/USCG, NORMALISATION 530X120X80MM

REF NO : 232048

IMPA 8

STEP WOOD REPAIR FOR MED/USCG, NORMALISATION 525X115X63MM

REF NO : 232049

IMPA 8

SPREADER WOOD REPAIR MED/USCG, NORMALISATION 1800X115X63MM

REF NO : 232050

Recently Viewed Products

IMPA 8

DISH ROUND STAINLESS STEEL, 165MM DIAM

REF NO : 170816

IMPA 7

ROPE MOORING MIXED POLYESTER, &NIKASTEEL 12ST 88MMDIAX220MTR

REF NO : 211970

IMPA 8

HEX HEAD BOLT STAINLESS STEEL, M10 X 95MM

REF NO : 691772

IMPA 8

HEX HEAD BOLT STAINLESS STEEL, M10 X 80MM

REF NO : 691769

IMPA 7

FOAM RUBBER SHEET MOLTPLAIN, 15MM 1X2MTR

REF NO : 150683

IMPA 8

DRIVE HARD DISC EXTERNAL, PORTABLE 1TB

REF NO : 472889

IMPA 8

WRENCH STRIKING RING 12P 71MM, NON-SPARK SPECIAL ALUM BRONZE

REF NO : 615598

IMPA 7

ROPE MOORING UNILON DOUBLE, BRAIDED 5"CIR X 200MTR

REF NO : 211921

IMPA 8

HAMMER BLACKSMITH DOUBLE FACE, WITH HANDLE NO.18 (8.1KGS)

REF NO : 612532

IMPA 8

HANDLE ALUMI W/SCREW THREAD, VIKAN #29594 25X1460MM RED

REF NO : 510895

IMPA 8

HOSE HYDRAULIC SYNTHETIC FIBRE, REINFORCED 15KG 38MM

REF NO : 350407

IMPA 8

PAIL STORAGE FOR CONDIMENT, POLYETHYLENE 20LTR

REF NO : 172963

IMPA 8

CHEESE CUTTER STAINLESS STEEL, TWISTED WIRE BLADE 120MM

REF NO : 172842

IMPA 8

TAPE PIPE IDENTIFICATION MULTI, STEAM HEAT PROCESS 100MMX25M

REF NO : 332161

IMPA 7

CHAIN TENSIONER MODEL CT-1-20, B/L 20TON

REF NO : 231892

IMPA 8

LAMP NAVIGATION TUBULAR, B-22D 220V 40W

REF NO : 790428

IMPA 8

MIRROR 303X455MM

REF NO : 530452

IMPA 8

CLEANER BATHROOM SPRAY TYPE, 400ML

REF NO : 550177

IMPA 8

SIGN GALLEY PLASTIC ONLY, 300X100MM

REF NO : 335690

IMPA 8

HAMMER COPPER HANDLED, NO.4 (2KGS)

REF NO : 612646

IMPA 8

WRENCH 12-POINT DOUBLE END, 27X30MM

REF NO : 610720

IMPA 8

HOSE WATER RUBBER WRAPPED &, FABRIC 5KG 19MMX2B

REF NO : 350153

IMPA 8

WRENCH DOUBLE HEAD RATCHET, & SPUD 12-POINT 10X13MM

REF NO : 611052

IMPA 8

WRENCH L-TYPE 6-POINT 10MM

REF NO : 610945

IMPA 8

DISH ROUND STAINLESS STEEL, 410MM DIAM

REF NO : 170822

IMPA 8

CLEANER EXTRA-LIFE FOR FRUIT &, VEGETABLE ORGACURE 500GX3

REF NO : 550669

IMPA 8

FIRE CONTROL SYMBOL ISO 17631, HALON FIRE EXTING'NG INSTALL'N

REF NO : 336822

IMPA 8

FLAG NATIONAL 3'X 4' BUNTING, REPUBLIC OF THE GAMBIA

REF NO : 373479

IMPA 8

SCREWDRIVER WOOD HANDLE, HEAVY-DUTY PHILLIPS NO.2 100MM

REF NO : 612213

IMPA 8

PIPE CARBONSTEEL HIGH-TEMP., STPT SCH-160 12"(300A)X5.5MTR

REF NO : 710565

IMPA 7

CABLE REEL EXTENSION AC110V, 20MTR

REF NO : 794391

IMPA 7

VISCOSITY METER 50-2000MPA/S, WITH STANDARD ROTOR NO.1 & 2

REF NO : 652801

IMPA 8

TUBE COPPER SEAMLESS 14X0.8MM, 5MTR

REF NO : 711426

IMPA 8

DISPOSABLE POLYETHYLENE GLOVES, LARGE FOR U.K. SHIPS

REF NO : 392016

IMPA 8

SPARE JAW FOR STRAIGHT BOLT, CUTTER 900MM

REF NO : 611876

IMPA 8

CHECK&STORM VALVE DIN C.STEEL, DIN FLANGED PN16 DN 250

REF NO : 755990

IMPA 8

HALF UNION FLARED BRASS, STRAIGHT THREAD 8MM X PF1/4

REF NO : 733605

IMPA 8

MATTING RUBBER CORRUGATED, NON-CONDUCTING 4.5X1000MMX10M

REF NO : 511099

IMPA 8

PIN PUSH 20'S/PKT

REF NO : 471113

IMPA 7

MANILA ROPE 3STRAND, 1-3/4"CIRX220MTR

REF NO : 210155

IMPA 8

FLANGE CAST IRON RAISED FACE, DIN2533 16KG 250MM

REF NO : 734555

IMPA 8

SHACKLE BOW W/SAFETY BOLT GALV, GREEN PIN G-4163 38MM 17TON

REF NO : 234573

IMPA 7

ROPE WIRE DELTA FILLER WITH, FURTHER DETAIL

REF NO : 213806

IMPA 7

BOOTS RUBBER WITH STEEL TOE, SHORT SIZE EU 47(28.5CM)

REF NO : 191240

IMPA 8

POST-IT MEMO 50X75MM 100'S

REF NO : 471322

IMPA 8

DEGREASER 200LTR

REF NO : 551002

IMPA 7

PLATTER OVAL CHINA, STANDARD QUALITY 207X151MM

REF NO : 170302

IMPA 8

PLIER SIDE-CUTTING INSULATED, 150MM

REF NO : 611657

IMPA 8

PUNCH WAD HEAVY DUTY 38MM

REF NO : 613099

IMPA 8

COUPLING HOSE 2/3 BRASS, 1-1/4" X 25MM BSP FEMALE

REF NO : 351177

IMPA 7

PUMP END SUCTION BARE SHAFT, WITH FURTHER INFORMATION

REF NO : 591761

IMPA 7

FL CEILINGLIGHT NON-WATERTIGHT, SURFACE 100/115V KQB203 20WX3

REF NO : 791901

IMPA 7

COUPLER QUICK-CONNECT, STAINLESS STEEL 600PM R-3/4

REF NO : 351356

IMPA 7

GAUGE PRESSURE AT RIMLESS, SQ.SHANK G3/8 75MM 0 - 0.7MPA

REF NO : 653068

IMPA 7

EAR CUP KIT LEFT/RIGHT MEDIUM, SNR 28-H/M/L 29/25/17 WHITE

REF NO : 331264

IMPA 7

STICK THERMOMELT TEMPERATURE, 125°C

REF NO : 851184

IMPA 7

REACTIVE STRIPS FOR URINE, ANALYSIS FOR U.K. SHIPS

REF NO : 392031

IMPA 7

FACSIMILE RECORDING PAPER, FOR FURUNO FX-410

REF NO : 372633

IMPA 7

SURFACE PLATE BOX TYPE, CAST IRON 500X350X90MM

REF NO : 651031

IMPA 7

VALVE SAFETY GUNMETAL #851BGFL, 0.5-50 BAR G1" & 1-1/2"

REF NO : 757093

IMPA 7

LAMP COLORED E-26, 110-120V 20W RED

REF NO : 790301

IMPA 7

HELI-SERT STAINLESS STEEL, COARSE M3.5 X 0.6 X 3.5MM

REF NO : 693826

IMPA 7

COMPASS STEEL 500MM

REF NO : 650221

IMPA 7

STAINLESS STEEL ROUND, HOT-ROLLED SUS-430 25MM 12FEET

REF NO : 671824

IMPA 7

WIRE BRASS 0.65MM

REF NO : 672354

IMPA 7

FIRE HOSE H.K. APPROVED, 50MMX15MTR 1.3MPA

REF NO : 330737

IMPA 7

LAMP INDICATOR SINGLE LED E10, 10X24MM 24-28VOLT YELLOW

REF NO : 790890

IMPA 7

FILE FLAT DOUBLE-CUT, DEAD-SMOOTH 400MM

REF NO : 614326

IMPA 7

VALVE SAFETY S.STEEL #451BGFL, DIN 0.5-50 BAR G1-1/4" & 2"

REF NO : 757299

IMPA 7

GLOBE VALVE DIN CAST IRON, FLANGED PN10/16 #268 50MM

REF NO : 755266

IMPA 7

BRUSH TUBE STEEL CONDENSER, 100MM X 1/2" MALE THREAD

REF NO : 510717

IMPA 7

HOLE SAW CARBIDE TIPPED, STANDARD TYPE 22MM DIA

REF NO : 633608

IMPA 7

GREASE GEAR SHELL, MEREUTH FLUID RL 16KG

REF NO : 450183

IMPA 7

GLOBE VALVE DIN FORGED STEEL, FLANGED PN40 #1202 DN 15

REF NO : 755452

IMPA 7

GLOBE VALVE CAST-IRON FLANGED, F7305 5KG-350MM

REF NO : 750210

IMPA 7

CHOCKING BACKING COMPOUND, WEICON CBC 3.0 KG

REF NO : 812955

IMPA 7

MICROMETER DEPTH 0-25MM, IN 0.01MM BASE WIDTH 63.5MM

REF NO : 650471

IMPA 7

T-SQUARE ONE SIDE WHITE, PLASTIC 1050MM

REF NO : 471560

IMPA 7

V BELT WEDGE TYPE 3V 1120

REF NO : 814827

IMPA 7

SIGN ENGRAVED VYNALAST GREEN, W/WHITE TEXT PROVIDE TEXT&SIZE

REF NO : 338914

IMPA 7

MAGNET PAPER HOLDING, 15MM DIAM BLUE

REF NO : 471651

IMPA 7

UNION COMPRESSION STEEL, 10.5MM 400KG

REF NO : 733166

IMPA 7

HOLE SAW TONGSTEN CARBIDE, TIPPED DEEP CUT 57MM DIA

REF NO : 633743

IMPA 7

CONNECTOR COMPRESSION STEEL, 12MMXPT3/8 400KG

REF NO : 733109

IMPA 7

BELL ALARM WATER TIGHT, TYPE#L120 W/PILOT LAMP DC22V

REF NO : 793441

IMPA 7

ROLLER BEARING N-222

REF NO : 771520

IMPA 7

HAZARD WARNING DIAMOND #2248LL, CLASS 1 EXPLOSIVES G 250X250MM

REF NO : 332248

IMPA 7

BALL VALVE DIN STAINLESS STEEL, WAFER TYPE PN 40 #7383 DN 65

REF NO : 756899

IMPA 7

SHREDDER PAPER AC220V, CROSS CUT 10 SHTS CAPACITY

REF NO : 471041

IMPA 7

GATE VALVE DIN CAST IRON, FLANGED PN10 #317 DN 500

REF NO : 755584

IMPA 7

PIPE STAINLESS STEEL SUS-304, SCH-80 125A 5"X4MTR

REF NO : 711114

IMPA 7

PACKING DOOR WATERTIGHT, EPDM RUBBER 15X15MM L:10MTR

REF NO : 815023

IMPA 8

YAM CHINESE (NAGAIMO) FRESH

REF NO : 000196

IMPA 7

BALL BEARING DOUBLE ROW, DEEP GROOVE NO.2218K

REF NO : 771144

IMPA 7

STEEL SQUARE COLD-FINISHED 7MM, 12FEET

REF NO : 670850

No result found

No result found

Description

LADDR PILOT MED/USCG APPROVED, NORMALISATION STEP 6MTR

Description

More from ' Pilot Ladders as per Latest MED/USCG Approved '

Recently Viewed Products