A high strength, light weight, and easy to install fire integrity composite grating for ships and vessels, offering a “Fit it and Forget it” solution to walkway grating. DURAGRID® Phenolic’s corrosion- and fire- resistance has made this product a champion in the Marine and Offshore Oil and Gas industries for decades. Features: Higher strength than equivalent steel grating./No Rust - typically outlasts the ship’s lifespan (can be transferred)./Dependable anti-skid surface for safety and comfort./Light weight - up to 75% lighter than comparable steel grating./Safe and easy to install - no welding or hot works. Regulatory Information and Approvals*: ASTM: First composite grating to meet ASTM F3059-15 standard, an enhancement to and expected replacement of USCG PFM2-98./USCG: 164.040/16/0(38mm and 45mm (1-½" - 1-¾"))./IMO: Meets requirements for Safe Access to Tanker Bows (Resolution MSC.62(67)) (SC 253 Dec 2011 Rev 1 May 2016)./Numerous Class Approvals such as ABS, DNV, and LR. *For a current and complete list of these approvals, please contact Strongwell directly. Typical Ship Applications: Center passage walkway grating/Oil spill tank grating/Winch stand grating/Flying passage (LNG) grating/Manifold grating/Lashing bridge grating/Monkey stage grating/Wheel house stage grating/Gangways - Safe access to bow/Various stage areas (Monkey, Wheel House, etc.) Availability* & Panel Sizes: Factory: I-6000 in 3’ x 20’, 4’ x 20’, 1M x 6M (38mm (1-1/2”) or 45mm (1.75”) thickness)/Rotterdam or Factory: 1M x 6M (38mm (1.5”) thickness)/Weight: 38mm thickness - 16.8 kg/M2 (3.4 lb/ft2) 45mm thickness - 19.0 kg/M2 (3.9 lb/ft2) *Strongwell can also drop ship to a specific location or port. Performance (I-6000 38mm): 16.8 kN/m2 (350 lb/ft2) uniform loading* (SF [Safety Factor] + 6:1) /11.7 kN/m (11.7 lb/ft) concentrated loading* (SF + 5:1) * Based on a midspan deflection of 6.35mm (.25”) on qualified span of 1120mm (44”). Installation: DURAGRID® Phenolic installs similar to how steel grating is installed. The bearing bar (BB) is the load carrying member which runs between supports. This is the panel length and is typically designated with a (BB) after the dimension to avoid confusion. DURAGRID® Phenolic does not require any banding after cutting. Loads are effectively transferred by a series of cross-rods spaced every 6” (150 mm) (sometimes referred to as “cross-rod pitch”). Installation is easy; the grating can be cut using simple hand tools such as a circular saw (diamond or masonry blades suggested) or a jig saw (carbide grit blades suggested). Panels are lightweight - single panels are typically moved by hand. When ordering, please specify: Square Foot (SF) or Square Meter (M2) Measurements of the areas that needs grating./ Hardware (Part # 744 clip & 797 bolt set) - 4 clips per panel or 4 clips per M2.