Marine Type Approvals held for these valves: DNV / Lloyd’s Register EMEA /
American Bureau of Shipping / Bureau Veritas , Russian Maritime Register of Shipping Registro Italiano Navale. Pressure reducer with flange connection made of gunmetal with balanced single seat valve and built-in dirt trap for the protection of domestic water supply systems and commercial and industrial plants against an excess supply pressure. Pressure reducers are used, if within a piping system despite of varying pressures on the inlet side a certain pressure must not be exceeded on the outlet side. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with -EPDM (ethylene propylene diene) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. -FKM (Fluorocarbon) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc..- low pressure 682/482mGFO-LP EPDM and FKM - standard pressure 682/482mGFO-SP EPDM and FKM - high pressure 682/482mGFO-HP EPDM and FKM. Mesh sizes : DN15 to DN32 = 0.6 mm DN40 and DN80 = 0.75 mm (682), DN40 and DN100 = 0.75 mm (482). Seats for 682: DN15 to DN50 made of gunmetal/stainless steel DN65 to DN100 made of/stainless steel. All models also available in Stainless Steel : series 482.
Marine Type Approvals held for these valves: DNV / Lloyd’s Register EMEA /
American Bureau of Shipping / Bureau Veritas , Russian Maritime Register of Shipping Registro Italiano Navale. Pressure reducer with flange connection made of gunmetal with balanced single seat valve and built-in dirt trap for the protection of domestic water supply systems and commercial and industrial plants against an excess supply pressure. Pressure reducers are used, if within a piping system despite of varying pressures on the inlet side a certain pressure must not be exceeded on the outlet side. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with -EPDM (ethylene propylene diene) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. -FKM (Fluorocarbon) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc..- low pressure 682/482mGFO-LP EPDM and FKM - standard pressure 682/482mGFO-SP EPDM and FKM - high pressure 682/482mGFO-HP EPDM and FKM. Mesh sizes : DN15 to DN32 = 0.6 mm DN40 and DN80 = 0.75 mm (682), DN40 and DN100 = 0.75 mm (482). Seats for 682: DN15 to DN50 made of gunmetal/stainless steel DN65 to DN100 made of/stainless steel. All models also available in Stainless Steel : series 482.
More from ' Gunmetal with Flange Connection Model 682'