VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-SP DN50

Description

Marine Type Approvals held for these valves: DNV / Lloyd’s Register EMEA / American Bureau of Shipping / Bureau Veritas , Russian Maritime Register of Shipping Registro Italiano Navale. Pressure reducer with flange connection made of gunmetal with balanced single seat valve and built-in dirt trap for the protection of domestic water supply systems and commercial and industrial plants against an excess supply pressure. Pressure reducers are used, if within a piping system despite of varying pressures on the inlet side a certain pressure must not be exceeded on the outlet side. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with -EPDM (ethylene propylene diene) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. -FKM (Fluorocarbon) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc..- low pressure 682/482mGFO-LP EPDM and FKM - standard pressure 682/482mGFO-SP EPDM and FKM - high pressure 682/482mGFO-HP EPDM and FKM. Mesh sizes : DN15 to DN32 = 0.6 mm DN40 and DN80 = 0.75 mm (682), DN40 and DN100 = 0.75 mm (482). Seats for 682: DN15 to DN50 made of gunmetal/stainless steel DN65 to DN100 made of/stainless steel. All models also available in Stainless Steel : series 482.

VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-SP DN50

REF NO : 756613
Category Stainless Steel with Flange Connection Model 482
Package Qty 1 PCS

Description

Marine Type Approvals held for these valves: DNV / Lloyd’s Register EMEA / American Bureau of Shipping / Bureau Veritas , Russian Maritime Register of Shipping Registro Italiano Navale. Pressure reducer with flange connection made of gunmetal with balanced single seat valve and built-in dirt trap for the protection of domestic water supply systems and commercial and industrial plants against an excess supply pressure. Pressure reducers are used, if within a piping system despite of varying pressures on the inlet side a certain pressure must not be exceeded on the outlet side. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with -EPDM (ethylene propylene diene) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. -FKM (Fluorocarbon) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc..- low pressure 682/482mGFO-LP EPDM and FKM - standard pressure 682/482mGFO-SP EPDM and FKM - high pressure 682/482mGFO-HP EPDM and FKM. Mesh sizes : DN15 to DN32 = 0.6 mm DN40 and DN80 = 0.75 mm (682), DN40 and DN100 = 0.75 mm (482). Seats for 682: DN15 to DN50 made of gunmetal/stainless steel DN65 to DN100 made of/stainless steel. All models also available in Stainless Steel : series 482.

More from ' Stainless Steel with Flange Connection Model 482'

Recently Viewed Products

REF NO : 004275
ABOUT Con-Lash Supply Catalog

Our mission statement is to provide the absolute best customer experience available in the marine industry without exception.

Follow Us
POPULAR COLLECTIONS
OUR NEWSLETTER

Subscribe to get notified about product launches, special offers and news.

Powered By Logo Version - 24.07.25.1